The control of the gas turbine is provided by a GE Mark V TCS. Visualisation is via a single HMI operator station running GE Simplicity version 5.5 under Windows 2000. The existing overall plant monitoring and control system (DCS) used is the Contronic E system from ABB. During 2022, it will be replaced with a new Siemens PCS7 DCS (DCS7) system. It is responsible for the key monitoring and control functions of the overall plants, including: -
• Overall plant monitoring, control, operation and management.
• Signal input/output and conditioning.
• Open and closed loop control of plant.
• Plant protection functions including Functional Safety.
• Data communications.
• Data recording, alarm/event annunciation and logging, sequence of event recording.
The goal is to find a supplier with proven technology, knowledge, experience and capabilities of performing the replacement of the Turbine Control System
Deadline
De termijn voor de ontvangst van de offertes was 2022-03-24.
De aanbesteding werd gepubliceerd op 2022-02-14.
Leveranciers
De volgende leveranciers worden genoemd in gunningsbesluiten of andere aanbestedingsdocumenten:
Object Toepassingsgebied van de aanbesteding
Titel:
“Replacement Turbine Control System Gas Turbine and Generator at Uniper
WS885281995”
Producten/diensten: Besturingapparatuur voor turbinegenerator📦
Korte beschrijving:
“The control of the gas turbine is provided by a GE Mark V TCS. Visualisation is via a single HMI operator station running GE Simplicity version 5.5 under...”
Korte beschrijving
The control of the gas turbine is provided by a GE Mark V TCS. Visualisation is via a single HMI operator station running GE Simplicity version 5.5 under Windows 2000. The existing overall plant monitoring and control system (DCS) used is the Contronic E system from ABB. During 2022, it will be replaced with a new Siemens PCS7 DCS (DCS7) system. It is responsible for the key monitoring and control functions of the overall plants, including: -
• Overall plant monitoring, control, operation and management.
• Signal input/output and conditioning.
• Open and closed loop control of plant.
• Plant protection functions including Functional Safety.
• Data communications.
• Data recording, alarm/event annunciation and logging, sequence of event recording.
The goal is to find a supplier with proven technology, knowledge, experience and capabilities of performing the replacement of the Turbine Control System
1️⃣
Aanvullende producten/diensten: Turbine-installatie📦
Plaats van uitvoering: Nederland🏙️
Hoofdlocatie of plaats van uitvoering: Rotterdam
Beschrijving van de aanbesteding: 0
Gunningscriteria
Kwaliteitscriterium (naam): Technical
Kwaliteitscriterium (weging): 45
Kwaliteitscriterium (naam): Non technical
Kwaliteitscriterium (weging): 5
Prijs (weging): 50
Duur
Startdatum: 2022-07-21 📅
Einddatum: 2023-06-02 📅
Informatie over de beperkingen van het aantal uit te nodigen kandidaten
Verwacht aantal kandidaten: 3
Objectieve criteria voor de keuze van het beperkte aantal kandidaten: - Criterium: Similar works reference
Juridische, economische, financiële en technische informatie Economische en financiële draagkracht
Lijst en korte beschrijving van de selectiecriteria: - Requirements regarding financial and economic standing
Technische en professionele bekwaamheid
Lijst en korte beschrijving van de selectiecriteria:
“- Requirement 1: Similar works,
- Requirement 2: Quality, Environment and Safety,
- Requirement 3: Basic supplier requirements”
Procedure Soort procedure
Procedure van gunning via onderhandelingen met voorafgaande oproep tot mededinging
Administratieve informatie
Termijn voor de ontvangst van inschrijvingen of verzoeken tot deelneming: 2022-03-24
17:30 📅
Geschatte datum van verzending van de uitnodigingen tot inschrijving of tot deelneming aan de geselecteerde gegadigden: 2022-04-04 📅
Talen waarin inschrijvingen of aanvragen tot deelneming kunnen worden ingediend: Nederlands 🗣️
Award Aankondiging (2022-09-12) Object Toepassingsgebied van de aanbesteding
Totale waarde van de opdracht (exclusief BTW): EUR 516480.0 💰
Procedure Administratieve informatie
Eerdere publicatie betreffende deze procedure: 2022/S 035-091173
Gunning van het contract
1️⃣
Contractnummer: 1
Titel: Replacement Turbine Control System Gas Turbine and Generator at Uniper
Datum van sluiting van het contract: 2022-07-21 📅
Informatie over aanbestedingen
Aantal ontvangen offertes: 2
Aantal elektronisch ontvangen inschrijvingen: 2
Naam en adres van de contractant
Naam: Thomassen Energy B.V.
Nationaal registratienummer: 24272908
Postadres: Havelandseweg 8 d
Poststad: Rheden
Postcode: 6991GS
Land: Nederland 🇳🇱
Regio: Nederland🏙️
URL: http://www.ansaldothomassen.nl🌏
De aannemer is een KMO ✅ Informatie over de waarde van de opdracht/het perceel (exclusief BTW)
Totale waarde van het contract/perceel: EUR 516480.0 💰
Bron: OJS 2022/S 179-507811 (2022-09-12)