Leverancier: Instron France SAS
2 gearchiveerde aanbestedingen
Instron France SAS is van oudsher een leverancier van laboratoriuminstrumenten, optische en precisie-instrumenten (uitgezonderd brillen), controle- en testapparatuur en machines en toestellen voor testen en meten.
Recente aanbestedingen waarbij de leverancier Instron France SAS wordt genoemd
2021-08-26
High-force dynamic mechanical thermal analyser (DMTA) (Technische Universiteit Delft)
The subject of this tender is the production, delivery and installation of a versatile high force electrodynamic mechanical thermal analyser (hereafter referred to as: DMTA). The setup will be used for research, development and education in the department of Materials Science and Engineering (MSE) of the Delft University of Technology (TU Delft). The DMTA setup will be used by research technicians, PostDocs, PhDs, MSc and BSc students. Bekijk de aanbesteding »
The subject of this tender is the production, delivery and installation of a versatile high force electrodynamic mechanical thermal analyser (hereafter referred to as: DMTA). The setup will be used for research, development and education in the department of Materials Science and Engineering (MSE) of the Delft University of Technology (TU Delft). The DMTA setup will be used by research technicians, PostDocs, PhDs, MSc and BSc students. Bekijk de aanbesteding »
2017-10-19
Direct supply contract for the delivery, installation, commissioning, acceptance testing, training and preventive... (European Commission, Joint Research Centre (JRC), JRC.G — Nuclear Safety and Security (Karlsruhe), JRC.G.I.4 — Nuclear Reactor S)
JRC Petten is planning procurement of a universal tabletop uniaxial tensile testing machine driven by a linear motor to conduct material testing on structural materials. The equipment shall allow performing strain or force controlled material tests such as tensile, compression tests, fatigue, fracture toughness tests and small punch tests at ambient temperatures and optionally at high and sub-zero temperatures. Bekijk de aanbesteding »
JRC Petten is planning procurement of a universal tabletop uniaxial tensile testing machine driven by a linear motor to conduct material testing on structural materials. The equipment shall allow performing strain or force controlled material tests such as tensile, compression tests, fatigue, fracture toughness tests and small punch tests at ambient temperatures and optionally at high and sub-zero temperatures. Bekijk de aanbesteding »