Precision Machined Parts

Universiteit Leiden

The tender concerns the procurement of several different Precision Machined Parts in five lots.

Deadline

De termijn voor de ontvangst van de offertes was 2023-11-21. De aanbesteding werd gepubliceerd op 2023-10-04.

Wie? Wat? Waar?
Aankoopgeschiedenis
Datum Document
2023-10-04 Aankondiging van een opdracht
Aankondiging van een opdracht (2023-10-04)
Object
Toepassingsgebied van de aanbesteding
Titel: Astronomische en optische instrumenten
Korte beschrijving:
The tender concerns the procurement of several different Precision Machined Parts in five lots.
Aankondigingsmetadata
Originele taal: Engels 🗣️
Documenttype: Aankondiging van een opdracht
Aard van de opdracht: Leveringen
Regelgeving: Europese Unie, met GPA-deelname
Gemeenschappelijke woordenlijst overheidsopdrachten (CPV)
Code: Astronomische en optische instrumenten 📦
Aanvullende CPV-code: Astronomische en optische instrumenten 📦
Plaats van uitvoering
NUTS-regio: Groningen 🏙️

Procedure
Type procedure: Openbare procedure
Type bod: Inschrijving voor alle percelen
Gunningscriteria
Laagste prijs

Aanbestedende dienst
Identiteit
Land: Nederland 🇳🇱
Type aanbestedende dienst: Publiekrechtelijke instelling
Naam aanbestedende dienst: Universiteit Leiden
Postadres: Kolffpad 1
Postcode: 2333BN
Poststad: Leiden
Contact
Internetadres: http://www.universiteitleiden.nl 🌏
E-mail: g.m.schipperheijn@ufb.leidenuniv.nl 📧
Telefoon: +31 715273304 📞
URL van de documenten: https://s2c.mercell.com/today/52919 🌏
URL voor deelname: https://s2c.mercell.com/today/52919 🌏

Referentie
Datums
Verzenddatum: 2023-10-04 📅
Indieningstermijn: 2023-11-21 📅
Publicatiedatum: 2023-10-09 📅
Identificatoren
Aankondigingsnummer: 2023/S 194-608135
PB-S nummer: 194
Aanvullende informatie
Electronically.

Object
Toepassingsgebied van de aanbesteding
Geschatte totale waarde: 1 091 000 EUR 💰
Benaming van het perceel: Lot 1 - Precision Machined parts: tolerance 0.05/0.02mm
Perceelnummer: 1
Korte beschrijving:
Atacama Large Millimeter/submillimeter Array (ALMA)
The Atacama Large Millimeter/submillimeter Array (ALMA), an international astronomy facility, is a partnership of Europe, North America and East Asia in cooperation with the Republic of Chile. ALMA is funded in Europe by the European Organization for Astronomical Research in the Southern Hemisphere (ESO), in North America by the U.S. National Science Foundation (NSF) in cooperation with the National Research Council of Canada (NRC) and the National Science Council of Taiwan (NSC) and in East Asia by the National Institutes of Natural Sciences (NINS) of Japan in cooperation with the Academia Sinica (AS) in Taiwan.
Toon meer
ALMA operations are led on behalf of Europe by ESO, on behalf of North America by the National Radio Astronomy Observatory (NRAO), which is managed by Associated Universities, Inc. (AUI) and on behalf of East Asia by the National Astronomical Observatory of Japan (NAOJ).
Toon meer
The Joint ALMA Observatory (JAO) provides the unified leadership and management of the construction, commissioning and operation of ALMA.
ALMA is a single instrument composed of 66 high-precision antennas located in the II Region of Chile, in the District of San Pedro de Atacama, at the Chajnantor Altiplano, 5,000 metres above sea level (see Figure 1).
ALMA's primary function is to observe and image with unprecedented clarity the enigmatic cold regions of the Universe, which are optically dark, yet shine brightly in the millimeter-submillimeter part of the electromagnetic spectrum.
ALMA Band 2 Receiver Project
In the past years, NOVA has developed and produced the ALMA Band 5 and 9 receivers.
NOVA is presently producing the ALMA Band 2 receivers. This is a cryogenic heterodyne receiver offering state-of-the-art sensitivities at signal frequencies from 67 - 116 GHz.
A consortium of three institutes executes the work:
The ALMA/NOVA group within the Kapteyn Institute, the Astronomy department of the University of Groningen in the Netherlands
GARD (Group for Advanced Receiver Development) within the University of Göteborg, Sweden
INAF (Italian National Institute for Astrophysics) in Bologna, Italy
NOVA leads in the project and performs this work under contract to ESO.
The challenging science goals, large scope, and remote location of the ALMA project, combined with the Receiver Cartridges’ cryogenic operating temperatures (as low as 15 K or  -258°C), place high demands on the performance and reliability of the Band 2 Receivers Cartridges and their components.
Toon meer
The tender concerns the procurement of Precision Machined Parts in five lots.
Duur: 12 maanden
Benaming van het perceel: Lot 2 - Precision Machined parts small: tolerance 0.005 mm
Perceelnummer: 2
Benaming van het perceel: Lot 3 – Precision Machined parts, sheet material, bended
Perceelnummer: 3
Benaming van het perceel: Lot 4 – Precision Machined parts, turning: tolerance 0.005mm
Perceelnummer: 4
Benaming van het perceel: Lot 5 – Precision Machined parts milling: tolerance 0.005mm
Perceelnummer: 5
Plaats van uitvoering
Hoofdlocatie of plaats van uitvoering:
Delivery in Groningen.
Delivery in Groningen

Procedure
Rechtsgrondslag: 32014L0024
Tijdstip van ontvangst van inschrijvingen: 12:00
Talen waarin inschrijvingen of aanvragen tot deelneming kunnen worden ingediend: Engels 🗣️
Geldigheidsduur van de inschrijving: 3 maanden
Datum opening inschrijvingen: 2023-11-21 📅
Tijdstip van opening inschrijvingen: 12:01
Plaats: Leiden.
Aanvullende informatie: Electronically.

Aanbestedende dienst
Identiteit
Nationaal registratienummer: 27368929
Contact
Contactpunt: Govert Schipperheijn
Internetadres: www.universiteitleiden.nl 🌏
Adres van het kopersprofiel: https://s2c.mercell.com/buyer/19549 🌏
Documenten URL: https://s2c.mercell.com/today/52919 🌏

Aanvullende informatie
Beoordelingsorgaan
Naam: Rechtbank Den Haag
Poststad: Den Haag
Land: Nederland 🇳🇱
Informatie over termijnen voor beroep: Within 20 days of contract-award decision.
Bron: OJS 2023/S 194-608135 (2023-10-04)