Stichting Voorbereiding Pallas-Reactor is pleased to invite companies to fulfil the following requirements for the provision of AKI (“Aangewezen Keuring Instantie”, Dutch for Notified Body) NUCLEAR services for the design, procurement, manufacturing, erection, construction and commissioning of:
— NPE (Nuclear Pressure Equipment) and
— Nuclear Non-Pressurized Equipment of new build facilities.
Deadline
De termijn voor de ontvangst van de offertes was 2019-03-06.
De aanbesteding werd gepubliceerd op 2019-02-04.
Leveranciers
De volgende leveranciers worden genoemd in gunningsbesluiten of andere aanbestedingsdocumenten:
Object Toepassingsgebied van de aanbesteding
Titel:
“Provision of AKI Nuclear (Notified Body) Services for Nuclear Pressure Equipment”
Producten/diensten: Certificeringsdienstverlening📦
Korte beschrijving:
“Stichting Voorbereiding Pallas-Reactor is pleased to invite companies to fulfil the following requirements for the provision of AKI (“Aangewezen Keuring...”
Korte beschrijving
Stichting Voorbereiding Pallas-Reactor is pleased to invite companies to fulfil the following requirements for the provision of AKI (“Aangewezen Keuring Instantie”, Dutch for Notified Body) NUCLEAR services for the design, procurement, manufacturing, erection, construction and commissioning of:
— NPE (Nuclear Pressure Equipment) and
— Nuclear Non-Pressurized Equipment of new build facilities.
1️⃣
Aanvullende producten/diensten: Tanks, reservoirs, containers en drukvaten📦
Plaats van uitvoering: Nederland🏙️
Hoofdlocatie of plaats van uitvoering
Beschrijving van de aanbesteding:
“In order to allow Pallas to obtain the license for operation, the Contractor must issue the proper declarations to testify that all activities and...”
Beschrijving van de aanbesteding
In order to allow Pallas to obtain the license for operation, the Contractor must issue the proper declarations to testify that all activities and deliverables during the design, procurement, manufacturing, erection, construction and commissioning are fully in compliance with applicable codes and standards.
The Contractor’s activities include but are not limited to:
— endorsement of codes and standards,
— design review and endorsement,
— inspection and testing,
— attendance to factory acceptance test,
— attendance to hold points,
— issue of reports,
— issue of declarations of conformity.
Toon meer Gunningscriteria
De prijs is niet het enige gunningscriterium en alle criteria worden alleen in de aanbestedingsdocumenten vermeld
Duur van de opdracht, raamovereenkomst of dynamisch aankoopsysteem
Het onderstaande tijdschema is uitgedrukt in aantal maanden.
Beschrijving
Duur: 24
Duur van de opdracht, raamovereenkomst of dynamisch aankoopsysteem
Dit contract kan worden verlengd ✅ Beschrijving
Beschrijving van de verlengingen: Renewal options will be provided in the tender documentation.
Informatie over de beperkingen van het aantal uit te nodigen kandidaten
Beoogd minimumaantal: 1
Maximaal aantal: 5
Objectieve criteria voor de keuze van het beperkte aantal kandidaten:
“— knock out criterion: willingness to obtain and maintain the certification to act as a AKI Nuclear according to regulations for nuclear new build pressure...”
Objectieve criteria voor de keuze van het beperkte aantal kandidaten
— knock out criterion: willingness to obtain and maintain the certification to act as a AKI Nuclear according to regulations for nuclear new build pressure equipment throughout the duration of the contract,
— significant recent experience Notified Body services of nuclear pressure equipment,
— significant recent experience in engineering of new build pressure equipment,
— suitably Qualified and Experienced Person (SQEP) for performing the AKI Nuclear services,
— organizational capability to carry out the services,
— knock out criterion: willingness to provide VOG (“Verklaring Omtrent het Gedrag” and is a document issued by the Dutch State Secretary for Justice and Security) in case of Contract award,
— knock out criterion: rejection of the Applicant by ANVS.
Juridische, economische, financiële en technische informatie Economische en financiële draagkracht
Selectiecriteria zoals vermeld in de aanbestedingsdocumenten
Technische en professionele bekwaamheid
Selectiecriteria zoals vermeld in de aanbestedingsdocumenten
Procedure Soort procedure
Beperkte procedure
Informatie over een raamovereenkomst of een dynamisch aankoopsysteem
Raamovereenkomst met één exploitant
Beschrijving
Motiveer in het geval van raamovereenkomsten elke looptijd van meer dan 8 jaar: N/a
Administratieve informatie
Termijn voor de ontvangst van inschrijvingen of verzoeken tot deelneming: 2019-03-06 📅
Geschatte datum van verzending van de uitnodigingen tot inschrijving of tot deelneming aan de geselecteerde gegadigden: 2019-04-05 📅
Talen waarin inschrijvingen of aanvragen tot deelneming kunnen worden ingediend: Engels 🗣️
Het onderstaande tijdschema is uitgedrukt in aantal maanden.
Minimumtermijn gedurende welke de inschrijver de offerte gestand moet doen: 6
Aanvullende informatie Informatie over elektronische workflows
Er zal gebruik worden gemaakt van elektronische bestellingen
Elektronische facturering wordt aanvaard
Beoordelingsorgaan
Naam: Court of Alkmaar
Poststad: Alkmaar
Land: Nederland 🇳🇱 Voor bemiddelingsprocedures verantwoordelijke instantie
Naam: Court of Alkmaar
Poststad: Alkmaar
Land: Nederland 🇳🇱 Dienst waar informatie over de beroepsprocedure kan worden verkregen
Naam: Court of Alkmaar
Poststad: Alkmaar
Land: Nederland 🇳🇱
Bron: OJS 2019/S 026-058077 (2019-02-04)
Award Aankondiging (2019-09-03) Object Toepassingsgebied van de aanbesteding
Titel:
“Provision of AKI Nuclear (Notified Body) Services for Nuclear Pressure Equipment
180139”
Korte beschrijving:
“Stichting Voorbereiding Pallas-Reactor is pleased to invite companies to fulfil the following requirements for the provision of AKI (‘Aangewezen Keuring...”
Korte beschrijving
Stichting Voorbereiding Pallas-Reactor is pleased to invite companies to fulfil the following requirements for the provision of AKI (‘Aangewezen Keuring Instantie’, Dutch for notified body) nuclear services for the design, procurement, manufacturing, erection, construction and commissioning of:
— NPE (Nuclear Pressure Equipment), and
— nuclear non-pressurized equipment of new build facilities.
Toon meer
Totale waarde van de opdracht (exclusief BTW): EUR 2 000 000 💰
Beschrijving
Beschrijving van de aanbesteding:
“In order to allow Pallas to obtain the license for operation, the contractor must issue the proper declarations to testify that all activities and...”
Beschrijving van de aanbesteding
In order to allow Pallas to obtain the license for operation, the contractor must issue the proper declarations to testify that all activities and deliverables during the design, procurement, manufacturing, erection, construction and commissioning are fully in compliance with applicable codes and standards.
The contractor’s activities include but are not limited to:
— endorsement of codes and standards,
— design review and endorsement,
— inspection and testing,
— attendance to factory acceptance test,
— attendance to hold points,
— issue of reports,
— issue of declarations of conformity.
Procedure Informatie over de kaderovereenkomst
De aanbesteding omvat de vaststelling van een raamovereenkomst
Administratieve informatie
Eerdere publicatie betreffende deze procedure: 2019/S 026-058077
Informatie over de beëindiging van de oproep tot mededinging in de vorm van een vooraankondiging
De aanbestedende dienst zal geen verdere opdrachten gunnen op basis van deze vooraankondiging
Gunning van het contract
1️⃣
Contractnummer: 180139
Titel: AKI Services
Datum van sluiting van het contract: 2019-07-04 📅
Informatie over aanbestedingen
Aantal ontvangen offertes: 3
Naam en adres van de contractant
Naam: TuV Rheinland Industrie Services GmbH
Nationaal registratienummer: HRB26876
Poststad: Cologne
Land: Duitsland 🇩🇪
Regio: Nederland🏙️
De aannemer is een KMO
Informatie over de waarde van de opdracht/het perceel (exclusief BTW)
Geraamde totale waarde van de opdracht/het perceel: EUR 2 000 000 💰
Totale waarde van het contract/perceel: EUR 2 000 000 💰
Bron: OJS 2019/S 171-418185 (2019-09-03)