Carbon steel pipe fittings DN650-DN1400

N.V. Nederlandse Gasunie

Description of the scope of the assignment:
The applicable process Description of the scope of the assignment:
The applicable process conditions for the Fittings are:
โ€” medium: natural gas/ natural gas condensate,
โ€” design pressure (P d): 0 bar โ‰ค P d โ‰ค 80 bar and
โ€” design temperature (T d): minimum โˆ’20 ยบC, maximum + 50 ยบC.
Please note that Gasunie remains the right to order Fittings for other pressure ranges, temperature ranges and medium beside gas/natural gas condensate.
Supply and fabrication of pipe fittings from the range of DN650 up to and including DN1400:
โ€” Elbows 1.5D, 45 and 90 degrees,
โ€” Tees:
โ€”โ€” with and without guide bars;
โ€”โ€” extruded type.
โ€” Concentric reducers,
โ€” Caps

Deadline

De termijn voor de ontvangst van de offertes was 2018-10-03. De aanbesteding werd gepubliceerd op 2018-08-01.

Leveranciers

De volgende leveranciers worden genoemd in gunningsbesluiten of andere aanbestedingsdocumenten:

Wie? Wat? Waar?
Aankoopgeschiedenis
Datum Document
2018-08-01 Aankondiging van een opdracht
2018-09-12 Aanvullende inlichtingen
2019-01-21 Award Aankondiging
Aankondiging van een opdracht (2018-08-01)
Object
Toepassingsgebied van de aanbesteding
Titel: Pijpfittings
Referentienummer: EA-2018.13/YY
Korte beschrijving:
Description of the scope of the assignment: The applicable process Description of the scope of the assignment: The applicable process conditions for the Fittings are: โ€” medium: natural gas/ natural gas condensate, โ€” design pressure (P d): 0 bar โ‰ค P d โ‰ค 80 bar and โ€” design temperature (T d): minimum โˆ’20 ยบC, maximum + 50 ยบC. Please note that Gasunie remains the right to order Fittings for other pressure ranges, temperature ranges and medium beside gas/natural gas condensate. Supply and fabrication of pipe fittings from the range of DN650 up to and including DN1400: โ€” Elbows 1.5D, 45 and 90 degrees, โ€” Tees: โ€”โ€” with and without guide bars; โ€”โ€” extruded type. โ€” Concentric reducers, โ€” Caps
Toon meer
Aankondigingsmetadata
Originele taal: Engels ๐Ÿ—ฃ๏ธ
Documenttype: Aankondiging van een opdracht
Aard van de opdracht: Leveringen
Regelgeving: Europese Unie, met GPA-deelname
Gemeenschappelijke woordenlijst overheidsopdrachten (CPV)
Code: Pijpfittings ๐Ÿ“ฆ
Plaats van uitvoering
NUTS-regio: Nederland ๐Ÿ™๏ธ

Procedure
Type procedure: Procedure van gunning via onderhandelingen
Type bod: Inschrijving voor alle percelen
Gunningscriteria
Uit economisch oogpunt voordeligste inschrijving

Aanbestedende dienst
Identiteit
Land: Nederland ๐Ÿ‡ณ๐Ÿ‡ฑ
Type aanbestedende dienst: Nutsbedrijf
Naam aanbestedende dienst: N.V. Nederlandse Gasunie
Postadres: Concourslaan 17
Postcode: 9727 KC
Poststad: Groningen
Contact
Internetadres: http://www.gasunie.nl ๐ŸŒ
E-mail: y.a.yung@gasunie.nl ๐Ÿ“ง
Telefoon: +31 631037653 ๐Ÿ“ž
URL van de documenten: http://gasunie.supplier.ariba.com/register ๐ŸŒ
URL voor deelname: https://www.tenderned.nl/tenderned-web/aankondiging/detail/publicatie/akid/e32fcf35a90c7003a428f26e4fd52a7e ๐ŸŒ

Referentie
Datums
Verzenddatum: 2018-08-01 ๐Ÿ“…
Indieningstermijn: 2018-10-03 ๐Ÿ“…
Publicatiedatum: 2018-08-03 ๐Ÿ“…
Identificatoren
Aankondigingsnummer: 2018/S 148-339759
PB-S nummer: 148
Aanvullende informatie
Access to Tender documents โ€“ Ariba The tender shall be carried out by means of the SAP Ariba network. All requested information shall be submitted via this network. In order to gain access to the network and the tender documents, candidates shall take the following steps: Step 1: Registration on SAP Ariba network โ€” In case the candidate has not previously registered itself on the SAP Ariba network, or in case a specific Ariba-Gasunie relation has not been established, candidate shall first register using the following link: http://gasunie.supplier.ariba.com/register โ€” In case the candidate has registered with the Ariba network and candidate has established a specific Ariba-Gasunie relation, candidate is requested to verify if the stored company data are still correct. Candidate can access the Ariba network using the following link: http://gasunie.supplier.ariba.com/ Step 2: approach Gasunie contact person โ€” Once a confirmation of successful registration has been received, candidate can express their interest for participation by sending an email to the Gasunie contact person as mentioned under section I.1 stating company name and the tender reference nr/name. Note: Within 48 (business) hours after receipt of candidates request for participation (step 2), candidate will receive an invitation to participate and will be granted access to the tender documents. In case candidate has have not received and invitation within that timeframe, please inform the Gasunie contact person or submit an email to: procurementsupport@gasunie.nl Assistance Instruction manuals can be downloaded at https://www.gasunie.nl/en/suppliers/ariba In case you maintain to have problems accessing the tender documents, please inform the Gasunie contact person or submit an email to: procurementsupport@gasunie.nl. Specific issues regarding the SAP Ariba network account can be addressed at https://support.ariba.com/help/?locale=en
Toon meer

Object
Toepassingsgebied van de aanbesteding
Korte beschrijving:
Description of the scope of the assignment:
The applicable process Description of the scope of the assignment:
The applicable process conditions for the Fittings are:
โ€” medium: natural gas/ natural gas condensate,
โ€” design pressure (P d): 0 bar โ‰ค P d โ‰ค 80 bar and
โ€” design temperature (T d): minimum โˆ’20 ยบC, maximum + 50 ยบC.
Please note that Gasunie remains the right to order Fittings for other pressure ranges, temperature ranges and medium beside gas/natural gas condensate.
Supply and fabrication of pipe fittings from the range of DN650 up to and including DN1400:
โ€” Elbows 1.5D, 45 and 90 degrees,
โ€” Tees:
โ€”โ€” with and without guide bars;
โ€”โ€” extruded type.
โ€” Concentric reducers,
โ€” Caps
Does not apply.
Duur: 60 maanden
Beschrijving van de verlengingen:
The contract that Gasunie intends to conclude shall have a duration of five (5) years with the option to extend this contract by one (1) year each time with a maximum of five (5) years.
Beschrijving van de opties:
The contract that Gasunie intends to conclude shall have a duration of five (5) years with the option to extend this contract by one (1) year each time with a maximum of five (5) years.
Plaats van uitvoering
Hoofdlocatie of plaats van uitvoering: Deventer, The Netherlands

Procedure
Rechtsgrondslag: 32014L0025
Tijdstip van ontvangst van inschrijvingen: 12:00
Datum van verzending van uitnodigingen: 2018-10-22 ๐Ÿ“…
Talen waarin inschrijvingen of aanvragen tot deelneming kunnen worden ingediend: Engels ๐Ÿ—ฃ๏ธ
Geldigheidsduur van de inschrijving: 2 maanden
Gunningscriteria
Kwaliteitscriterium (naam): Quality
Kwaliteitscriterium (weging): 60
Prijs (weging): 40

Aanbestedende dienst
Identiteit
Nationaal registratienummer: 152182772
Contact
Contactpunt: Yi An Yung
Documenten URL: http://gasunie.supplier.ariba.com/register ๐ŸŒ

Referentie
Aanvullende informatie
Access to Tender documents โ€“ Ariba
The tender shall be carried out by means of the SAP Ariba network. All requested information shall be submitted via this network.
In order to gain access to the network and the tender documents, candidates shall take the following steps:
Step 1: Registration on SAP Ariba network
โ€” In case the candidate has not previously registered itself on the SAP Ariba network, or in case a specific Ariba-Gasunie relation has not been established, candidate shall first register using the following link: http://gasunie.supplier.ariba.com/register
Toon meer
โ€” In case the candidate has registered with the Ariba network and candidate has established a specific Ariba-Gasunie relation, candidate is requested to verify if the stored company data are still correct. Candidate can access the Ariba network using the following link: http://gasunie.supplier.ariba.com/
Toon meer
Step 2: approach Gasunie contact person
โ€” Once a confirmation of successful registration has been received, candidate can express their interest for participation by sending an email to the Gasunie contact person as mentioned under section I.1 stating company name and the tender reference nr/name.
Toon meer
Note: Within 48 (business) hours after receipt of candidates request for participation (step 2), candidate will receive an invitation to participate and will be granted access to the tender documents. In case candidate has have not received and invitation within that timeframe, please inform the Gasunie contact person or submit an email to: procurementsupport@gasunie.nl
Toon meer
Assistance
Instruction manuals can be downloaded at https://www.gasunie.nl/en/suppliers/ariba
In case you maintain to have problems accessing the tender documents, please inform the Gasunie contact person or submit an email to: procurementsupport@gasunie.nl. Specific issues regarding the SAP Ariba network account can be addressed at https://support.ariba.com/help/?locale=en
Toon meer

Aanvullende informatie
Beoordelingsorgaan
Naam: Rechtbank Noord Nederland Groningen
Postadres: Postbus 781
Poststad: Groningen
Postcode: 9700 AT
Land: Nederland ๐Ÿ‡ณ๐Ÿ‡ฑ
Telefoon: +31 883614444 ๐Ÿ“ž
E-mail: info.rechtbanknoordnederland@rechtspraak.nl ๐Ÿ“ง
Internetadres: http://www.rechtspraak.nl ๐ŸŒ
Bron: OJS 2018/S 148-339759 (2018-08-01)
Aanvullende inlichtingen (2018-09-12)
Object
Toepassingsgebied van de aanbesteding
Korte beschrijving:
Description of the scope of the assignment: The applicable process Description of the scope of the assignment: The applicable process conditions for the Fittings are: โ€” medium: natural gas/ natural gas condensate, โ€” design pressure (P d): 0 bar โ‰ค P d โ‰ค 80 bar, and โ€” design temperature (T d): minimum โˆ’20 ยบC, maximum +50 ยบC. Please note that Gasunie remains the right to order Fittings for other pressure ranges, temperature ranges and medium beside gas/natural gas condensate. Supply and fabrication of pipe fittings from the range of DN650 up to and including DN1400: โ€” elbows 1.5D, 45 and 90 degrees, โ€” tees: โ€”โ€” with and without guide bars, โ€”โ€” extruded type, โ€” concentric reducers, โ€” caps.
Toon meer
Aankondigingsmetadata
Documenttype: Aanvullende inlichtingen

Aanbestedende dienst
Identiteit
Naam aanbestedende dienst: NV Nederlandse Gasunie

Referentie
Datums
Verzenddatum: 2018-09-12 ๐Ÿ“…
Indieningstermijn: 2018-10-01 ๐Ÿ“…
Publicatiedatum: 2018-09-14 ๐Ÿ“…
Identificatoren
Aankondigingsnummer: 2018/S 177-402167
Verwijst naar aankondiging: 2018/S 148-339759
PB-S nummer: 177
Aanvullende informatie
Due to project need, Gasunie has accelerated the tender of pipe fittings DN650-DN1400.

Object
Toepassingsgebied van de aanbesteding
Korte beschrijving:
โ€” design pressure (P d): 0 bar โ‰ค P d โ‰ค 80 bar, and
โ€” design temperature (T d): minimum โˆ’20 ยบC, maximum +50 ยบC.
โ€” elbows 1.5D, 45 and 90 degrees,
โ€” tees:
โ€”โ€” with and without guide bars,
โ€”โ€” extruded type,
โ€” concentric reducers,
โ€” caps.
Bron: OJS 2018/S 177-402167 (2018-09-12)
Award Aankondiging (2019-01-21)
Object
Toepassingsgebied van de aanbesteding
Korte beschrijving:
Description of the scope of the assignment: The applicable process Description of the scope of the assignment: The applicable process conditions for the Fittings are: โ€” medium: natural gas/ natural gas condensate, โ€” design pressure (P d): 0 bar โ‰ค P d โ‰ค 80 bar, and โ€” design temperature (T d): minimum โˆ’20 Please note that Gasunie remains the right to order Fittings for other pressure ranges, temperature ranges and medium beside gas/natural gas condensate. Supply and fabrication of pipe fittings from the range of DN650 up to and including DN1400: โ€” Elbows 1.5D, 45 and 90 degrees โ€” Tees: โ€”โ€” with and without guide bars, โ€”โ€” extruded type, โ€” Concentric reducers, โ€” Caps.
Toon meer
Totale waarde van de aanbesteding: 1.0 EUR ๐Ÿ’ฐ
Aankondigingsmetadata
Documenttype: Award Aankondiging

Procedure
Type bod: Niet van toepassing

Referentie
Datums
Verzenddatum: 2019-01-21 ๐Ÿ“…
Publicatiedatum: 2019-01-23 ๐Ÿ“…
Identificatoren
Aankondigingsnummer: 2019/S 016-034630
PB-S nummer: 16

Object
Toepassingsgebied van de aanbesteding
Korte beschrijving:
โ€” design temperature (T d): minimum โˆ’20
โ€” Elbows 1.5D, 45 and 90 degrees
โ€” Caps.
Plaats van uitvoering
Hoofdlocatie of plaats van uitvoering: Deventer, THE NETHERLANDS.

Gunning van het contract
Datum van sluiting van de overeenkomst: 2019-01-18 ๐Ÿ“…
Naam: Uhlig Rohrbogen GmbH
Postadres: Innerstetal 16
Poststad: Langelsheim
Postcode: 38685
Land: Duitsland ๐Ÿ‡ฉ๐Ÿ‡ช
00 ๐Ÿ™๏ธ
Naam: Allied International SRL
Postadres: Loc Vascellino 1
Poststad: Nibbiano
Postcode: 29031
Land: Italiรซ ๐Ÿ‡ฎ๐Ÿ‡น
Totale waarde van de aanbesteding: 1.0 EUR ๐Ÿ’ฐ
Informatie over aanbestedingen
Aantal ontvangen offertes: 3
Bron: OJS 2019/S 016-034630 (2019-01-21)