Tender pre-insertion resistor 380 kV

TenneT TSO BV

The scope of this call for tender contains the design, supply, transport to site in the Netherlands, the supervision during erection and testing on site of pre-insertion resistors 380 kV for TenneT's high voltage grid in the Netherlands.
In the period between 2017 and 2023, TenneT expect to build 5 off-shore platforms for the connection of off-shore wind farms to TenneT's on-shore high voltage grid. For the connection of the platforms to TenneT's on-shore grid, TenneT shall equip 5 landstations with in total 30 single phase pre-insertion resistor 380 kV for outdoor application, with the following main characteristics: Installation locations are near the coast/industrial area, this shall be taken into account into the design (salty/polluted air);
Furthermore the following basic technical requirements are applicable:
Rated voltage: 380 kV;
Maximum system voltage Um: 420 kV;
Maximum 1-phase short circuit current: 63 kA/1s;
Resistance (exact value t.b.d.): 80 - 200 Ohm;
Current peak (depending on exact resistance value): 3,8 - 1,6 kA;
Duration energization: 100 ms;
Max. number of consecutive energizations: 3;
Inrush energy per energization (depending on exact resistance value): 5 - 2,5 MJ;
Inrush energy in case of fault (depending on exact resistance value): 60 - 25 MJ.
After selection of candidates, TenneT directly start with the call for tender for the mentioned pre-insertion resistors.
The call for tender shall result in a framework agreement with one supplier for the delivery and installation for all needed pre-insertion resistors in the mentioned period.
TenneT expect to make the first call of orders in Q1 / Q2 2017 for the pre-insertion resistors.
The TenneT tendering process for these components consists of 2 phases:
Phase 1: selection phase;
Phase 2: call for tender (ITT, RFQ, Initial bid, negotiation, Best and Final Offer, awarding).

Deadline

De termijn voor de ontvangst van de offertes was 2016-06-10. De aanbesteding werd gepubliceerd op 2016-05-04.

Leveranciers

De volgende leveranciers worden genoemd in gunningsbesluiten of andere aanbestedingsdocumenten:

Wie? Wat? Waar?
Aankoopgeschiedenis
Datum Document
2016-05-04 Aankondiging van een opdracht
2016-11-03 Award Aankondiging
Aankondiging van een opdracht (2016-05-04)
Object
Toepassingsgebied van de aanbesteding
Titel: Weerstanden
Hoeveelheid of omvang: See II.1.5) Short description.
Aankondigingsmetadata
Originele taal: Engels 🗣️
Documenttype: Aankondiging van een opdracht
Aard van de opdracht: Leveringen
Regelgeving: Europese Unie
Gemeenschappelijke woordenlijst overheidsopdrachten (CPV)
Code: Weerstanden 📦

Procedure
Type procedure: Niet-openbare procedure
Type bod: Inschrijving voor alle percelen
Gunningscriteria
Niet gespecificeerd

Aanbestedende dienst
Identiteit
Land: Nederland 🇳🇱
Type aanbestedende dienst: Andere
Naam aanbestedende dienst: TenneT TSO BV
Postadres: Utrechtseweg 310
Postcode: 6812 AR
Poststad: Arnhem
Contact
Internetadres: http://www.tennet.eu 🌏
E-mail: maarten.becker@tennet.eu 📧
Telefoon: +31 263733189 📞

Referentie
Datums
Verzenddatum: 2016-05-04 📅
Indieningstermijn: 2016-06-10 📅
Publicatiedatum: 2016-05-07 📅
Identificatoren
Aankondigingsnummer: 2016/S 089-157487
PB-S nummer: 89
Aanvullende informatie
This tender will be done via the platform Negometrix accessible on www.negometrix.com After free registration on Negometrix you will get the required access to relevant information of this tender.

Object
Toepassingsgebied van de aanbesteding
Korte beschrijving:
The scope of this call for tender contains the design, supply, transport to site in the Netherlands, the supervision during erection and testing on site of pre-insertion resistors 380 kV for TenneT's high voltage grid in the Netherlands.
In the period between 2017 and 2023, TenneT expect to build 5 off-shore platforms for the connection of off-shore wind farms to TenneT's on-shore high voltage grid. For the connection of the platforms to TenneT's on-shore grid, TenneT shall equip 5 landstations with in total 30 single phase pre-insertion resistor 380 kV for outdoor application, with the following main characteristics: Installation locations are near the coast/industrial area, this shall be taken into account into the design (salty/polluted air);
Toon meer
Furthermore the following basic technical requirements are applicable:
Rated voltage: 380 kV;
Maximum system voltage Um: 420 kV;
Maximum 1-phase short circuit current: 63 kA/1s;
Resistance (exact value t.b.d.): 80 - 200 Ohm;
Current peak (depending on exact resistance value): 3,8 - 1,6 kA;
Duration energization: 100 ms;
Max. number of consecutive energizations: 3;
Inrush energy per energization (depending on exact resistance value): 5 - 2,5 MJ;
Inrush energy in case of fault (depending on exact resistance value): 60 - 25 MJ.
After selection of candidates, TenneT directly start with the call for tender for the mentioned pre-insertion resistors.
The call for tender shall result in a framework agreement with one supplier for the delivery and installation for all needed pre-insertion resistors in the mentioned period.
TenneT expect to make the first call of orders in Q1 / Q2 2017 for the pre-insertion resistors.
The TenneT tendering process for these components consists of 2 phases:
Phase 1: selection phase;
Phase 2: call for tender (ITT, RFQ, Initial bid, negotiation, Best and Final Offer, awarding).
Referentienummer: 40832
Plaats van uitvoering
Hoofdlocatie of plaats van uitvoering: The Netherlands.

Juridische, economische, financiële en technische informatie
Voorwaarden voor deelname
Geschiktheid om de beroepsactiviteit uit te oefenen:
Interested candidate is able to see TenneT's requirements after candidate has asked via mail the contact point of clause I.1) to connect candidate with the tender on platform Negometrix.
Economische en financiële draagkracht:
Interested candidate is able to see TenneT's requirements after candidate has asked via mail the contact point of clause I.1) to connect candidate with the tender on platform Negometrix.
Technische en professionele bekwaamheid:
Interested candidate is able to see TenneT's requirements after candidate has asked via mail the contact point of clause I.1) to connect candidate with the tender on platform Negometrix.

Procedure
Looptijd van de raamovereenkomst in jaren: 3
Datum van verzending van uitnodigingen: 2016-07-06 📅
Talen
Taal: Engels 🗣️

Aanbestedende dienst
Identiteit
Nationaal registratienummer: 531969787
Ander type aanbestedende dienst: Other
Contact
Contactpunt: TenneT TSO Hoofdkantoor
Maarten Becker
Adres van het kopersprofiel: https://platform.negometrix.com/PublishedTenders.aspx?tenderid=40832 🌏

Referentie
Identificatoren
Door de aanbestedende dienst toegekend referentienummer: 40832
Bron: OJS 2016/S 089-157487 (2016-05-04)
Award Aankondiging (2016-11-03)
Object
Toepassingsgebied van de aanbesteding
Totale waarde van de aanbesteding: 2 000 000 EUR 💰
Aankondigingsmetadata
Documenttype: Award Aankondiging
Gemeenschappelijke woordenlijst overheidsopdrachten (CPV)
Aanvullende CPV-code: Weerstanden 📦
Plaats van uitvoering
NUTS-regio: Nederland 🏙️

Procedure
Type bod: Niet van toepassing
Gunningscriteria
Laagste prijs

Referentie
Datums
Verzenddatum: 2016-11-03 📅
Publicatiedatum: 2016-11-05 📅
Identificatoren
Aankondigingsnummer: 2016/S 214-389623
Verwijst naar aankondiging: 2016/S 089-157487
PB-S nummer: 214

Object
Toepassingsgebied van de aanbesteding
Korte beschrijving: A framework agreement for the expected demand of 380 kV pre-insertion resistors.

Gunning van het contract
Datum van sluiting van de overeenkomst: 2016-10-27 📅

Aanbestedende dienst
Identiteit
Ander type aanbestedende dienst: Transmission System Operator

Aanvullende informatie
Beoordelingsorgaan
Naam: TenneT TSO BV
Poststad: Arnhem
Land: Nederland 🇳🇱
Bron: OJS 2016/S 214-389623 (2016-11-03)
Nieuwe aankopen in verwante categorieën 🆕
Gerelateerde zoekopdrachten 🔍
Producten/diensten:
Elektrische machines, apparaten,... Elektronische, elektromechanische en... Elektronische uitrusting Elektronische benodigdheden Elektronische onderdelen Weerstanden