Description of the scope of the assignment: Supplying Insulating couplings from the range of DN50 up to/including DN1200. Insulating couplings consist of 2 concentric electrically insulated pipe elements which form a rigid and tight construction. The applicable process conditions for the Insulating couplings are: — medium: natural gas/ natural gas condensate; — design pressure system (P d): 0 bar ≤ P d ≤ 80 bar and — design temperature (T d): minimum -20 °C, maximum +50 °C. The design pressure of the Insulating couplings (Pd,IC) shall be two times the design pressure of the system. Traceability: The relation between the inspection certificates (‘material certificate’) and the components (pipe, forgings) used in the Insulation couplings must be fully assured. This means that the chemical composition of these components must be the same as the chemical composition of the raw material. Being compliant to the minimal chemical composition requirements of the standard or specification is not sufficient.
Deadline
De termijn voor de ontvangst van de offertes was 2016-05-04.
De aanbesteding werd gepubliceerd op 2016-03-30.
Aankondiging van een opdracht (2016-03-30) Object Toepassingsgebied van de aanbesteding
Titel: Geïsoleerde verbindingsstukken
Hoeveelheid of omvang: Not applicable.
Aankondigingsmetadata
Originele taal: Engels 🗣️
Documenttype: Aankondiging van een opdracht
Aard van de opdracht: Leveringen
Regelgeving: Europese Unie, met GPA-deelname
Gemeenschappelijke woordenlijst overheidsopdrachten (CPV)
Code: Geïsoleerde verbindingsstukken📦
Procedure
Type procedure: Procedure van gunning via onderhandelingen
Type bod: Inschrijving voor alle percelen
Gunningscriteria
Uit economisch oogpunt voordeligste inschrijving
Aanbestedende dienst Identiteit
Land: Nederland 🇳🇱
Type aanbestedende dienst: Nutsbedrijf
Naam aanbestedende dienst: N.V. Nederlandse Gasunie
Postadres: Concourslaan 17
Postcode: 9727 KC
Poststad: Groningen
Contact
Internetadres: http://www.gasunie.nl🌏
E-mail: y.a.yung@gasunie.nl📧
Telefoon: +31 631037653📞
Fax: +31 505211929 📠
Gasunie applies an e-tool for managing its supply base.
The requested information must be uploaded by the applicant. For the INITIAL registration the platform is accessible via http://gasunie.supplier.ariba.com/register. The interface is user-friendly and self-explanatory. In case you have any questions when registering, there is a manual available at http://www.gasunie.nl/leveranciers (english: http://www.gasunie.nl/en/suppliers). In case you still experience an issue after reading the manual, you are urged to immediately address the issue to the Gasunie contact as announced in this publication.
The applicant needs to be aware that the provided information will be captured in the Supplier Information System (SIM) and in this phase of the tender will be used as input/selection criteria. The applicant is responsible for self-registration on the Ariba platform. The applicant is always responsible for correct registration and application in the system.
Immediately after your registration you need to inform the Gasunie contact person as stated under I.1 on your registration and interest to participate in the tender stating your organisation's name as well as the tender's title. Based on this information you will be invited to the tender.
In case you registered before at the mentioned website, please verify your registered information by enetering the Ariba system via http://gasunie.supplier.ariba.com/. Next, please express your interest to join the event by email to the Gasunie contact person as indicated in this announcement to participate in the tender stating your organisation's name as well as the tender's title. For questions regarding your Ariba account please visit the following website: https://connect.ariba.com/AUC_Contact_Support/?locale=en.
Within 48 hours after the registration/verification AND email, you will receive an invitation (including a link) to join the sourcing event. If not, please contact the Gasunie contact-person as mentioned in the announcement. In case you experience issues contacting the contact-person, please inform Gasunie via procurementsupport@gasunie.nl
In case the person you mentioned in SIM differs form the one for this tender, please mention this person as well in SIM as well.
Gasunie applies an e-tool for managing its supply base.
The requested information must be uploaded by the applicant. For the INITIAL registration the platform is accessible via http://gasunie.supplier.ariba.com/register. The interface is user-friendly and self-explanatory. In case you have any questions when registering, there is a manual available at http://www.gasunie.nl/leveranciers (english: http://www.gasunie.nl/en/suppliers). In case you still experience an issue after reading the manual, you are urged to immediately address the issue to the Gasunie contact as announced in this publication.
The applicant needs to be aware that the provided information will be captured in the Supplier Information System (SIM) and in this phase of the tender will be used as input/selection criteria. The applicant is responsible for self-registration on the Ariba platform. The applicant is always responsible for correct registration and application in the system.
Immediately after your registration you need to inform the Gasunie contact person as stated under I.1 on your registration and interest to participate in the tender stating your organisation's name as well as the tender's title. Based on this information you will be invited to the tender.
In case you registered before at the mentioned website, please verify your registered information by enetering the Ariba system via http://gasunie.supplier.ariba.com/. Next, please express your interest to join the event by email to the Gasunie contact person as indicated in this announcement to participate in the tender stating your organisation's name as well as the tender's title. For questions regarding your Ariba account please visit the following website: https://connect.ariba.com/AUC_Contact_Support/?locale=en.
Within 48 hours after the registration/verification AND email, you will receive an invitation (including a link) to join the sourcing event. If not, please contact the Gasunie contact-person as mentioned in the announcement. In case you experience issues contacting the contact-person, please inform Gasunie via procurementsupport@gasunie.nl
In case the person you mentioned in SIM differs form the one for this tender, please mention this person as well in SIM as well.
Object Toepassingsgebied van de aanbesteding
Korte beschrijving:
Description of the scope of the assignment:
Supplying Insulating couplings from the range of DN50 up to/including DN1200. Insulating couplings consist of 2 concentric electrically insulated pipe elements which form a rigid and tight construction.
The applicable process conditions for the Insulating couplings are:
— medium: natural gas/ natural gas condensate;
— design pressure system (P d): 0 bar ≤ P d ≤ 80 bar and
— design temperature (T d): minimum -20 °C, maximum +50 °C. The design pressure of the Insulating couplings (Pd,IC) shall be two times the design pressure of the system.
Traceability:
The relation between the inspection certificates (‘material certificate’) and the components (pipe, forgings) used in the Insulation couplings must be fully assured. This means that the chemical composition of these components must be the same as the chemical composition of the raw material. Being compliant to the minimal chemical composition requirements of the standard or specification is not sufficient.
The relation between the inspection certificates (‘material certificate’) and the components (pipe, forgings) used in the Insulation couplings must be fully assured. This means that the chemical composition of these components must be the same as the chemical composition of the raw material. Being compliant to the minimal chemical composition requirements of the standard or specification is not sufficient.
Beschrijving van de opties:
The contracts that Gasunie intends to conclude shall have a duration of five (5) years with the option to extend this contract by one (1) year each time with a maximum of five (5) years.
Voorlopig tijdschema voor het gebruik van opties: 60 maanden
Aantal mogelijke verlengingen: 5
Tijdpad voor latere opdrachten: 12 maanden
Referentienummer: EA-2016.09/YY
Plaats van uitvoering
Hoofdlocatie of plaats van uitvoering: Deventer, The Netherlands.
Procedure
Aantal deelnemers aan de raamovereenkomst: 2
Looptijd van de raamovereenkomst in maanden: 60
Gunningscriteria
Criterium: 1. Criteria: Price Description: Of each criteria the elaboration, weighting and assessment will be detailed in the awarding guideline. The awarding guideline will be made available during the tendering phase, after the selection phase. Requirements: -
2. Criteria: Project plan Description: Of each criteria the elaboration, weighting and assessment will be detailed in the awarding guideline. The awarding guideline will be made available during the tendering phase, after the selection phase. Requirements: -
3. Criteria: Case Description: Of each criteria the elaboration, weighting and assessment will be detailed in the awarding guideline. The awarding guideline will be made available during the tendering phase, after the selection phase. Requirements: -
Talen
Taal: Engels 🗣️
Award Aankondiging (2016-12-14) Object Toepassingsgebied van de aanbesteding
Korte beschrijving:
Description of the scope of the assignment:
Supplying Insulating couplings from the range of DN50 up to/including DN1200. Insulating couplings consist of two concentric electrically insulated pipe elements which form a rigid and tight construction.
The applicable process conditions for the Insulating couplings are:
— medium: natural gas/ natural gas condensate;
— design pressure system (P d ): 0 bar ≤ P d ≤ 80 bar and
— design temperature (T d ): minimum -20 °C, maximum +50 °C. The design pressure of the Insulating couplings (Pd,IC) shall be two times the design pressure of the system.
Traceability:
The relation between the inspection certificates (‘material certificate’) and the components (pipe, forgings) used in the Insulation couplings must be fully assured. This means that the chemical composition of these components must be the same as the chemical composition of the raw material. Being compliant to the minimal chemical composition requirements of the standard...
Supplying Insulating couplings from the range of DN50 up to/including DN1200. Insulating couplings consist of two concentric electrically insulated pipe elements which form a rigid and tight construction.
The applicable process conditions for the Insulating couplings are:
— medium: natural gas/ natural gas condensate;
— design pressure system (P d ): 0 bar ≤ P d ≤ 80 bar and
— design temperature (T d ): minimum -20 °C, maximum +50 °C. The design pressure of the Insulating couplings (Pd,IC) shall be two times the design pressure of the system.
Traceability:
The relation between the inspection certificates (‘material certificate’) and the components (pipe, forgings) used in the Insulation couplings must be fully assured. This means that the chemical composition of these components must be the same as the chemical composition of the raw material. Being compliant to the minimal chemical composition requirements of the standard...
Aankondigingsmetadata
Documenttype: Award Aankondiging
Gemeenschappelijke woordenlijst overheidsopdrachten (CPV)
Aanvullende CPV-code: Isolerende fittings📦 Plaats van uitvoering
NUTS-regio: Nederland
🏙️
Object Toepassingsgebied van de aanbesteding
Korte beschrijving:
Supplying Insulating couplings from the range of DN50 up to/including DN1200. Insulating couplings consist of two concentric electrically insulated pipe elements which form a rigid and tight construction.
— design pressure system (P d ): 0 bar ≤ P d ≤ 80 bar and
— design temperature (T d ): minimum -20 °C, maximum +50 °C. The design pressure of the Insulating couplings (Pd,IC) shall be two times the design pressure of the system.
The relation between the inspection certificates (‘material certificate’) and the components (pipe, forgings) used in the Insulation couplings must be fully assured. This means that the chemical composition of these components must be the same as the chemical composition of the raw material. Being compliant to the minimal chemical composition requirements of the standard...
The relation between the inspection certificates (‘material certificate’) and the components (pipe, forgings) used in the Insulation couplings must be fully assured. This means that the chemical composition of these components must be the same as the chemical composition of the raw material. Being compliant to the minimal chemical composition requirements of the standard...
Not applicable.
Gunning van het contract
Datum van sluiting van de overeenkomst: 2016-12-13 📅