Aeronautical Air/Ground Radio Equipment
Air Traffic Control The Netherlands (ATC-NL) is a Dutch independent administrative organisation that is responsible for providing air traffic services to civil air traffic in the Dutch airspace in a safe, efficient, and environmentally sensible way. In the Dutch Aviation Act this and all other tasks of ATC-NL have been laid down. Besides the provision of air traffic services these tasks consist of the provision of communication, navigation and surveillance services (including the modernization and management of these technical systems), giving aeronautical information, catering for air traffic control training and providing aviation charts and publications. In short, ATC-NL is responsible for the control of Dutch civil airspace as well as parts of the Nordsee area and everything related. ATC-NL became operational in 1923 and since 1993 as an so called “Independent Administrative Body (ZBO)’. You can read and download relevant information regarding ATC-NL on
www.lvnl.nl and
www.luchtverkeersleider.nl.
The tender procedure concerns the design, delivery, installation and bringing into service of Air Traffic Control Ground Radio Equipment within the national safety critical environment Mainport Schiphol.
The scope of supply consists of the delivery and installation of Aeronautical Air/Ground Radio Equipment, including but not limited to radio transmitters and radio receivers, associated equipment (such as power supplies, couplers, distributors, racks) and hardware and software for Monitoring and Control purposes at ATC-NL locations. The Radio Equipment will be part of the Last Resort Radio Telephony Systems (LRRTS) at Schiphol-East, Schiphol-Centre and Rotterdam The Hague Airport. The LRRTS has access to 3 transmitter and 3 receiver sites. For these sites the following equipment and services are required:
Equipment
— Aeronautical Air/Ground Radio Transmitters for the VHF and UHF bands
— Aeronautical Air/Ground Radio Receivers for the VHF and UHF bands
— Associated Equipment for connecting the transmitters and receivers
— Cabinets
— Monitoring and Control equipment including work stations, software and licenses
— Documentation
Services
— System Design and System Design Review
— Acceptance Tests (Factory Acceptance Test and Site Acceptance Test)
— On-site Installation of Radio Equipment
— On-site Support during transition
— Training
— Maintenance and Logistics Support.
ATC-NL wishes to select a maximum of 5 Candidates by means of this Selection Guide, who have proven themselves as capable of realising similar contracts successfully. The selected Candidates will then be eligible for an invitation to tender.
Further information regarding this tender, can be found in the Selection Guide. The Selection Guide can be downloaded from
www.tenderned.nl or can be requested by sending a request to the following e-mail address:
contracting@lvnl.nl.
In case you made a request for the Selection Guide via e-mail or downloaded the Selection Guide from
www.tenderned.nl, you are requested to register as a user at this website. This will ensure that you will receive all relevant communications regarding this tender procedure e.g. the Memorandum of Explanation.
Deadline
De termijn voor de ontvangst van de offertes was 2014-05-12.
De aanbesteding werd gepubliceerd op 2014-04-10.
Leveranciers
De volgende leveranciers worden genoemd in gunningsbesluiten of andere aanbestedingsdocumenten:
Wie?
Wat?
Waar?
Aankoopgeschiedenis
| Datum |
Document |
| 2014-04-10
|
Aankondiging van een opdracht
|
| 2015-01-13
|
Award Aankondiging
|